鐵藝大門可以根據客戶的需求進行熱鍍鋅防銹處理，也可以結合產品的實用性和藝術性進行精心雕刻，使每一個產品都有價值，下面來講講濟南鐵藝大門的優勢與安裝前的準備工作。

Iron gate can be hot-dip galvanized and rust treated according to customer needs, or carefully carved based on the practicality and artistry of the product, making each product valuable. Below, we will talk about the advantages of Jinan Iron gate and the preparation work before installation.

鐵藝大門優勢：

Advantages of Iron Gate:

鐵藝大門品種繁多，不僅可以用來裝修大門，還可以在臥室、起居室、餐廳，配合不同的房間營造出不同的藝術氛圍，更可以使家居風格多樣化，更具現代氣息。鐵藝大門款式新穎，融合了中西古典的神韻，優雅而不失現代氣息，具個性。鐵門本身就有說不出的韻味，它不僅是個人某種情結的張揚，更是對歷史的回憶，對異國情調的崇尚。

There are a wide variety of iron gates, which can not only be used for decoration, but also create different artistic atmospheres in bedrooms, living rooms, and restaurants, in conjunction with different rooms. This can also make the home style more diverse and modern. The iron gate has a novel style, integrating the charm of Chinese and Western classical styles, elegant yet modern, and personalized. The Iron Gate itself has an indescribable charm. It is not only a display of a certain personal complex, but also a memory of history and a reverence for exotic sentiments.

鐵藝大門由厚度為1-1.2mm的優良薄壁碳鋼不銹鋼管或鋁金屬管制成，延展性好。設，應根據設計師的藝術匠心，充分發揮想象力。鐵藝大門之所以能夠在建筑和裝飾中占有一席之地，是因?yàn)樗旧砭哂泻芎玫膹?qiáng)度，抗風，抗老化，抗蟲害，這是其他材料無法比擬的。

The iron gate is made of high-quality thin-walled carbon steel stainless steel pipes or aluminum metal pipes with a thickness of 1-1.2mm, and has good ductility. When designing, one should fully utilize their imagination based on the designer's artistic craftsmanship. The reason why the iron gate can occupy a place in architecture and decoration is that it has good strength, wind resistance, aging resistance and pest resistance, which is incomparable with other materials.

鐵藝大門安裝前的準備：

Preparation before installation of iron gate:

根據圖紙要求檢查型號，檢查熟鐵的質量。如果發現棱角缺失、翹曲不均勻、偏差超標、劃痕嚴重、外觀色差大，應仔細與廠家協商，經修整鑒定合格后方可安裝。此外，還應檢查鐵藝大門上是否有保護膜。如有缺陷，應在施工安裝前進行補貼。

Check the model and quality of the wrought iron according to the drawing requirements. If missing edges and corners, uneven warping, excessive deviation, severe scratches, and large color difference are found, careful consultation with the manufacturer should be conducted, and installation can only be carried out after passing the repair and identification. In addition, it is also necessary to check if there is a protective film on the iron gate. If there are defects, subsidies should be provided before construction and installation.

看看要安裝的鐵藝大門的尺寸是否與房子的尺寸成一定比例。如果房子太大安裝的鐵藝大門太小，呈現的門一定很不協調。

Check if the size of the iron gate to be installed is proportional to the size of the house. If the house is too large and the iron gate installed is too small, the presented door must be very uncoordinated.

彈好鐵藝大門的位置線，并根據50cm水平線，確定好安裝標高。在安裝過程中準備腳手架，采取安全保護措施。

Snap the position line of the iron gate and determine the installation elevation based on the 50cm horizontal line. Prepare scaffolding during installation and take safety measures.

安裝步驟。

Installation steps.

鐵藝大門采用預留開口后堵塞開口的安裝方法。熟鐵開口的水平位置應以墻體50厘米線為標準，往上回，測量窗下皮標高，彈線找直。為了保證各層窗口的上下通線，兩側的直線用經緯儀打在墻上，塑鋼鐵藝框與墻體的間隙每側留10-15毫米。

The iron gate adopts the installation method of blocking the opening after reserving the opening. The horizontal position of the wrought iron opening should be based on the 50 centimeter line of the wall, turn upwards, measure the elevation of the window lower skin, and snap the line to align. In order to ensure the upper and lower lines of each layer of windows, the straight lines on both sides are marked on the wall with a theodolite, and the gap between the plastic steel iron frame and the wall is left at 10-15 millimeters on each side.

鐵藝大門門框用固定鐵件與墻體連接，即用自攻螺釘將鐵件安裝在窗框外側的足槽內，然后將鐵藝大門門框送入洞口進行定位，定位處穿過鐵件預留孔，在墻體相對位置鉆孔插入膨脹管，擰緊膨脹管螺釘將鐵件與墻體固定。還有什么問題可以隨時來我們http://www.qcfootdoc.com這里咨詢！

The iron gate frame is connected to the wall with fixed iron parts, that is, the iron parts are installed in the foot slots on the outer side of the window frame with self tapping screws, and then the iron gate frame is inserted into the hole for positioning. The positioning point passes through the reserved holes of the iron parts, and an expansion pipe is drilled and inserted in the relative position of the wall. The expansion pipe screws are tightened to fix the iron parts to the wall. If you have any further questions, feel free to come to us anytime http://www.qcfootdoc.com Consultation here!